Home arrow Empresa arrow Actividad
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
  • JoomlaWorks AJAX Header Rotator
Activities
Tuesday, 15 May 2007
This folder can also be downloaded in pdf format here (6 mb) 

Preventative Waterproofing

 business_activities1.jpg arrow.gif  Easy to apply products are the
core of our thinking.

Construction and Expansion Joints

Traditional PVC or rubber waterstops can be labour intensive and still proof to be inadequate for the job at hand. A good alterative is an injection tube, which is easily installed onto new or old concrete. Once the concrete has set, a waterproof resin is pumped through the injection tube to completely fill the joint interface.

Concrete penetrations and precast joints are troublesome details. These are easily tackled with expanding gaskets like hydrophilic rubber strips and mastics. Chemically resistant and flexible, these products are the obvious choice for a variety
of construction joints.

De Neef also offers a post-injectable hydrophilic rubber strip for increased insurance against leaks.
 
business_activities2.jpg business_activities3.jpg

arrow4.gif

Even difficult applications can be treated successfully with preventative products

arrow4.gif

Avoid problems and delays at a later stage by incorporating De Neef preventative waterproofing products at the early stages of construction.

 
business_activities5.jpg
 business_activities4.jpg

arrow4.gif

In hard applications, our products will give you the assurance you need

arrow4.gif

Incorporating preventative products in the design stage will avoid a lot of problems. Remember: To prevent is better than to cure.

Chemicals Containment

Traditional waterstop profiles cannot prevent hazardous chemicals from seeping into joint interfaces. Injection with a suitable resin allows voids to be completely filled with chemically resistant resins, thus barring contaminants from entry. Surfaces can also be protected with a 1-component polyurethane spray coating.

Concrete Surfaces

Structures can be subject to water infiltration because of the porosity of the concrete or masonry. De Neef has introduced a new range of hi-tech, high performance cementitious coatings for surface sealing, even under negative pressure. The products are easy-to-use and can be applied by brush, trowel or spray equipment.

 


Last Updated ( Thursday, 30 August 2007 )